Power calculator for heat pumps
1. Heating power of a Hisense Hi-Therma heat pump
Power = flow × density × specific heat × ΔT. Density and specific heat of the heating medium are determined from its mean temperature (and, for glycol, its concentration). For better accuracy you can add up to 3 measurements - the result is their average.
Model, compressor frequency and outdoor temperature are optional - once filled in (enter frequency and temperature in every measurement) the result is compared with the catalogue power right away. Without them the calculator only calculates the power.
Enter the data and click “Calculate unit power”.
To compare with the catalogue power, select a model and enter the compressor frequency and outdoor temperature in every measurement.
Comparison with catalogue power
Assumption: COP = CAP / IPT. This is a catalogue estimate, not a measured COP.
Comparison of results
Power comparison
Both values on the same scale
Calculate the power and fill in the comparison conditions.
| Outdoor temperature | Max. Hz |
|---|
The calculator does not account for heat losses related to the length of the split installation or for a change of ΔT across the heat exchanger. The unit's capacity tables are based on the nominal flow rate and ΔT = 5°C. Fluid property data is approximate; additives in a ready-mixed fluid may change the properties.